Manjughosh Engineering Service

We are providing Structural Design & Analysis on STADD Pro. & Proof Consultancy  G.A. & R.C.C Drawings of complete project  Bill of Quantity (BOQ) required for Project.

 We are designing and manufacturing Reactor, Column, Pressure Vessel, Storage Tanks, Heat Exchanger, Stacks, Hopper, Bins, Silos, Filters, Pig launcher & receivers, Steam Drums, Air Cooled Heat Exchanger, Air Cooled Steam Condenser, Condenser, Evaporator.

We are executing:Pressure Vessel Design using PV-elite/Compress: Calculation of

Pressure part (shell and head thickness, nozzle thickness.

A U-Tube Heat Exchanger is a type of shell-and-tube heat exchanger designed to efficiently transfer heat between two fluids. It is widely used in industries such as oil and gas, power generation, chemical processing, and HVAC systems. The "U-tube" design allows the exchanger to accommodate thermal expansion and contraction, making it ideal for high-temperature applications.

• U-Shaped Tubes: The tubes are bent into a U-shape, with both ends attached to a single tube sheet. This design allows one end to expand and contract freely with temperature fluctuations, reducing thermal stress.
• Tube Material: Often made from materials like stainless steel, copper, titanium, or alloys to handle corrosive environments and high temperatures.
• Tube Diameter: Common diameters range from 3/4 inch to 1 inch, selected based on fluid flow rate and heat transfer requirements.
• Tube Length: Standard lengths can vary, commonly from 6 to 20 feet, depending on the heat exchanger size and application.

• Shell Material: Typically carbon steel, stainless steel, or alloy materials based on the application, pressure, and temperature requirements.
• Baffles: Installed inside the shell to direct fluid flow across the tubes for improved heat transfer and to prevent tube vibrations. The baffle spacing and type (e.g., segmental, disc-and-doughnut) are designed based on fluid dynamics.
• Shell Side Inlet and Outlet: The fluid in the shell side flows perpendicular to the tubes for optimal heat exchange.

• Single Tube Sheet: One tube sheet supports both ends of the U-shaped tubes, which simplifies the design and allows for easy maintenance.

We are doing Study and Review of the Basic Engineering Design (BED).

 Development of piping and Instrumentation Diagrams (P&IDs).

 Utility mass and heat balance & it's respective P&IDs.

Specification of effluents.

 Hydraulic Calculations.

 Single phase pressure drop calculation.

 Pump Hydraulics.

 Two phase pressure drop calculation.

 Pressure drop calculation in process network.Equipment Sizing and Process Data Sheet (PDS). 

We are designing and manufacturing steam jacketed / limpat coil Pressure Vessel with complete support structure with skid mounted or saddle support / bracket support / skirt support compleate nozzles / flanges and instrumentation.

We are providing engineering consultancy service for Structural analysis services are essential for evaluating the strength, stability, and safety of various structures, including buildings, bridges, industrial facilities, and other infrastructures. These services involve a detailed assessment of structural components to ensure they meet regulatory standards and withstand environmental loads such as wind, seismic, and live loads. Utilizing advanced tools and software, structural engineers analyze factors like load distribution, stress points, and material behavior. The service often includes both theoretical and computational modeling, providing precise insights into a structure’s performance and identifying any potential vulnerabilities. Structural analysis services are crucial for new constructions, retrofitting projects, and ensuring the long-term safety and durability of existing structures etc.

We are specialized in providing FEED, EPC, Detailed designing & As Built Services of Oil & Gas / Refinery / Petrochemical industries, process plant, Power plant, Domestic plant,  that includes Process Design, Mechanical Design, piping, Civil and Structural, Electrical / Instrumentation.

We are doing Study and Review of the Basic Engineering Design (BED).

 Development of piping and Instrumentation Diagrams (P&IDs).

 Utility mass and heat balance & it's respective P&IDs.

Specification of effluents.

 Hydraulic Calculations.

 Single phase pressure drop calculation.

 Pump Hydraulics.

 Two phase pressure drop calculation.

 Pressure drop calculation in process network.Equipment Sizing and Process Data Sheet (PDS).

We are specialized in providing FEA of all kind of saped equipment and structure for Oil & Gas / Refinery / Petrochemical industries, process plant, Power plant, Domestic plant,  that includes.

Process Design 
Study and Review of the Basic Engineering Design (BED), Development of piping and Instrumentation Diagrams (P&IDs), Utility mass and heat balance & it's respective P&IDs, Specification of effluents, Hydraulic Calculations, Single phase pressure drop calculation, Pump Hydraulics, Two phase pressure drop calculation, Pressure drop calculation in process network, Insulation design, Fuel line steam tracing, Equipment sizing, Instrument and valve sizes, design review, HAZOP review, Thermal Rating of shell & tube heat exchangers, Thermal and mechanical design API Fired Heaters, Flare header network sizing, Relief Valve Sizing Calculations as per API 520, 526, Flare stack calculations, Fire Water System (Storage Tanks, Pumps, Headers, Sprinklers), Hazard and Operability Study.

API Fired Heater, Elevated Flare Package, Incineration Package, (HRSG) Heat Recovery Steam Generation Package, De-oiling package, Chemical injection Package, (GDU) Gas Dehydration Package, (GSU) Gas Sweetening Package, (R&R) Reactor Regeneration Package, Reactor agitator Package, CCR Platforming Package, (WHRU) Waste Heat Recovery unit, Boiler Package (Steam / Smoke tube), LP & HP heater, Cooling Tower System, Chiller plant etc.

• We design and manufacturing Exhaust stack system for Fired heater / Boilers / incineration and HRSG as per ASME Section VIII Division 
• The capacity as per flow required for equipment, blower capacity, distance required to flow the air of flue gases.

We are  Designing & Manufacturing of below mentioned SKIDS.

Chemical Injection Skid / Marcaptain Skid / Steam Generation Skid / De-oiling Skid / GLR Skid / VRU Skid / Gas Conditionig Skid / Copressor Skid / Lube oil Skid / Metering Skid / Water treatment Skid / PSA Skid / Customise Modular skids.

·      Mechanical Data Sheet Preparation, which include mechanical design calculation.

·      Material Requisitions Preparation

·      Technical Bid evaluation

·      Vender Document Review

·      Detailed Engineering drawing.

·      Mechanical design and detailing of API Fired Heater.

·      Mechanical design and detailing of Steam reformer.

·      Refractory Furnace: sizing of equipment, refractory.

·      Refractory anchor design.

·      Instrument connection nozzles.

·      Mechanical design and detailing of APH

·      Hot and cold flue gas ducting.

·      ID / FD fan

·      Burner hot and cold air ducting.

·      Damper design with linkage system.

·      Heater doors and port

·      Heater steel stack.

·      Platforms and ladders / stairs.

·      Heat exposed pressure part radiant / Convection section

·      Non-pressure part support bracket of Ni-Cr material,

·      Convection shoot blower and stem lancing

·      Non-pressure part support bracket with end header box.

·      Ceramic fiber / Refractory LHV wall construction

·      Insulating brick construction.